Our Objective

At Homecret, we have set ourselves the goal of revolutionizing the world of microcement, offering high-quality products that guarantee impeccable and long-lasting finishes. We are committed to constant innovation, sustainability and customer service, consolidating ourselves as leaders in the sector through innovative and personalized solutions.

Environment

Our commitment to quality behavior and respect for the environment is one of the pillars of Homecret.

Our commitments : We will minimize the environmental impact in the development of our activity in the manufacture and commercialization of microcements We continuously improve the processes, products and services We comply with the applicable legal requirements We keep the EQMS (Environmental Quality and Management System) operative In our manufacturing process we use products free of Volatile Organic Compounds.

Our products do not contain solvents harmful to health and do not emit formaldehyde or other toxic substances. The materials were subjected to rigorous testing to demonstrate that after application and when dry, they do not release harmful substances into the air.

Certificates

AENOR Certificate
ISO 9001
AENOR Certificate
ISO 14001
CE Certified
Sustainable Certifications

Our materials meet high mechanical strength, wear resistance, fire resistance, crack resistance, resistance to chemicals and corrosive substances, high adhesion and impermeability. All these quality standards are reflected in the corresponding tests in independent laboratories.

APPLUS Certificates

In 2015 we became the first company in the sector in Spain to obtain the APPLUS Integrated Management System Certificate that recognizes our work for quality and environmental protection (ISO-9001 quality and ISO- 14001 environmental certificates).

CE Certified

Our products have the CE marking according to the UNE 13813 standard for mortars for continuous coatings. The CE marking certifies and guarantees by means of rigorous tests and trials that the technical and mechanical performance of the product we declare is what it really is.

Sustainable Certifications

Due to the manufacturing system and the products used, our products comply with the Well, Leed, Breeam, Dgnb and Green certifications referred to sustainable construction. This is why we have participated in different projects with these demanding construction systems.

Warranty

15-year warranty

Non-cracking guarantee

The Microcement/Micromortar Homecret never cracks. If ever a crack appears on our Microcement will always be because the support where it has been applied has cracked or fissured. To avoid these cracks is established prior visit to the work to prevent this type of incident.

Adherence guarantee

We guarantee that Homecret Microcemento/Micromortero will not peel or flake off from the substrate where it is applied.

Application warranty

Homecret guarantees the correct and perfect application of Microcement/Micromortar according to the techniques specified with the contracting party once the color and finish have been confirmed.

No detuning guarantee

We guarantee that Homecret Microcemento/Micromortero has no apparent discolorations or changes in color over time. The varnishes used for sealing are aliphatic. Their chemical composition makes them a hard finish and very resistant to ultraviolet rays, so they do not yellow in sunlight.

Anti-slip warranty

We guarantee that our systems are anti-slip, obtaining the C3 Certificate (the highest level of anti-slip). This slip resistance is achieved by adding 0.008 mm thick microspheres to the floor finish.

Waterproof guarantees

In the case of areas that receive water such as showers, kitchen countertops or bathrooms, bathtubs, sinks, terraces, etc. ensure that the slopes are well made and there are no puddles or areas where water can accumulate. Homecret offers with the READY range (ready-to-use 100% waterproof microcement) a guarantee of total waterproofing in areas that receive water (as described in the paragraph above). Traditional bi-component microcement is not guaranteed in these areas.

Warranty for Microcement/Micromortar applied on damp substrates or substrates with capillary humidity

Microcement/Micromortar cannot be applied on substrates that:

1º) Have a humidity higher than 6%.
2º) Have capillary humidity on plaster or cement substrates recently made.

On any floor or wall made with a cement or gypsum-based product, putty, cement glue, monolayer, concrete, leveling paste, etc …) should be left the normal setting and drying time (usually 4 to 8 weeks, depending on the type of product, thickness of the layer, ventilation, humidity and ambient temperature.
Homecret does not offer any guarantee in cases where sufficient time has not been allowed for the drying of the substrates or capillary humidity has not been adequately treated before the application of the microcement. These areas with wet substrates or capillary humidity cause the microcement does not get its maximum hardening, whitish stains, affect the finish of the varnishes, can cause changes in colors and even peel the microcement.

Quality Assurance

Homecret has obtained the Quality Certificate based on UNE-EN-ISO 9001 standards. Quality Certificate 9001 Guarantee of commitment to the Environment Homecret has obtained the Environmental Certificate based on the UNE-EN-ISO 14001 standards. Certificate of Environmental Quality 14001 VOCs

At Homecret we are aware that we have to protect our planet. All our products are below the emissions allowed (Volatile Organic Compounds, or VOCs, responsible for the destruction of ozone in the lower layers of the atmosphere) by the European Community Regulations.

*This warranty does not cover structural movements or settlement of the building or dwelling that cause cracks, peeling or flaking of supports where it is applied, capillary humidity, blows, floods, furniture that damages the pavement or scratches or cracks in its surface caused by incorrect furniture.

Technical Data Sheets

  It is a bicomponent coating. The Econatur line is characterized by using two components for its hardening. The microcement powder must be mixed with the resin in the right proportion, to provide the hardness and the ideal adherence to the system. It stands out for its easy application and maneuverability with a trowel because its hardening time is very long.  

DOWNLOAD DATA SHEET

 

It is a water-based resin, with excellent compatibility with cement, to add to different cementitious mixtures, microcement or mortars, consolidating the cement layers and improving their mechanical properties, elasticity, adhesion and waterproofing.

 

DOWNLOAD DATA SHEET

 

It is a single-component coating formulated with high-performance cements, aggregates, additives, catalysts, inorganic dyes and synthetic resins.
The Erfitt microcement line is characterized by being a single-component coating. It only needs to be mixed with water for hardening. The main difference with respect to those combined with Indoor resin is that its hardening time is not as long. However, mixing with water and not with resin makes it simpler to apply.

 

DOWNLOAD DATA SHEET

 

The new formula of the Ready line of microcement, based on polyurethanes, is characterized by being the most versatile line.
Ready can be a ‘ready-to-use’ microcement with a hardness of 27 Mpa.
Ready allows its application on high traffic floors, with excellent results. Ready ‘ready to use’ allows its application on walls with many structural cracks, it has an incredible elasticity. They are waterproof in mass.

 

DOWNLOAD DATA SHEET

 

It is a one-component water-based acrylic sealer for microcement floors and other substrates, stands out for its high solids content and high impermeability, spreads evenly leaving a completely homogeneous film, seals the microcement or cementitious mortars, the essential purpose is to seal or anchor the microcement or mortars for subsequent finishing with products with more hardness, provides impermeability and avoid roller marks, very high hiding power due to its high solids content, very good planimetry.

 

DOWNLOAD DATA SHEET

 

It is a water-based resin, with excellent adhesion on any porous or very porous surface, and a permanent residual tack that ensures adhesion between coats; It has a great elasticity, maintaining this property for long periods of time with high resistance to water and alkalis so it resists excellently the different atmospheric conditions.

 

DOWNLOAD DATA SHEET

 

It is a two-component waterborne polyurethane varnish of very high hardness and chemical resistance.
It has the new WMA technology (without tinting agents). This technology is characterized by the absence of tinting agents in the satin and matte finishes.

 

DOWNLOAD DATA SHEET